Description
Wear-ability
- Ergonomic in design. Light and wearable
- Compact — Even in close quarters, it won’t get in your way
Use-ability
- Operates with a single button
- Tamper proof design is user-friendly
- Sensitive LCD icons
- Gas readings in real-time
Compliance-ability
- Non compliance warning lights let you know that you need to bump test your detector
- Self-testing feature for sensors, battery status, alarms, and circuit integrity
Manageability
- Use your IntelliDoX docking system with instrument management systems
Reliability
- Concussion-proof boot
- Tested for extreme environments
Technical Specifications
- SIZE 4.7 x 2.7 x 1.3 in. / 12.0 x 6.8 x 3.2 cm
- WEIGHT 8.2 ounces. / 233 g
- OPERATING TEMPERATURE -4 to +131°F / -20 to +50°C
- HUMIDITY 5 – 95% RH (non-condensing) continuous
- INGRESS PROTECTION IP68(dust, sand, dirt, water)
- ALARMS AND TYPE Visual, vibrating, 95 dB audible; Low, High, TWA (time-weighted average) STEL, OL (over limit)
- SELF-TEST 1 internal diagnostic every day (24 hours) on sensors, battery, and circuitry by activated detectors
- BATTERY LIFE 2 years, continuous use
- EVENT LOG most recent 70 events
USER FEATURES
- Adjust short-term exposure limit period (5-15 minutes in 1 minute intervals)
- Calibration intervals and span levels
- Bump testing interval
- Set combustible gases measurement from 0-100% LEL (Lower Explosive Limit) or Methane gas 0-5.0% v/v
- Calibration due (1 to 365 days, or zero setting to turn off)
- enable or disable individual sensors
- Stealth mode option
- Latching alarms
CERTIFICATIONS AND APPROVALS :
- Class I, Div 1, Group A, B, C, D
- Class I, Zone 0, Group IIC
- ATEX: II 1G Ex ia IIC T4 Ga
- IECEx: Ex ia IIC T4 Ga
- X: Meets all applicable European directives.
- To check out additional certifications, go to the manual or to Honeywell Analytics.
WARRANTY Full 2 years including battery and sensors